HD-5070
The HD-5070 Duct Access Door is designed to provide convenient, economical access to duct components. The insulated door panel, along with the gasketing between the door and frame assures a tight seal without obstruction in the air system. Duct access doors are available in either hinged (HD-5070) or double cam (CD-5080) construction.
|
Door:
|
24 gage galvanized steel, double panel.
|
|
|
Frame:
|
24 gage galvanized steel with 5/8" notched knock over tabs.
|
|
|
Hinge:
|
Continuous aluminum piano hinge. (HD-5070 only)
|
|
|
Insulation:
|
Door panel filled with 2" fiberglass insulation (7.7 R factor), compressed into 1".
|
|
|
Gasketing:
|
1/8" thick by 1/2" wide closed cell neoprene gasketing between door and frame.
|
|
|
Latch:
|
Self-tightening, hand operated cam latch.
|
STANDARD SIZE ACCESS DOORS (special sizes available upon request)
| NOMINAL DOOR SIZE W&H | Duct OPENING | WEIGHT PER DOOR HD-5070 | ||
|---|---|---|---|---|
| INCHES | mm | . | lbs. | kg. |
| 6x6 | 150x150 | 4-3/4x4-3/4 | 1-1/4 | 0.6 |
| 8x8 | 200x200 | 6-3/4x6-3/4 | 1-3/4 | 0.8 |
| 10x10 | 250x250 | 8-3/4x8-3/4 | 2-3/4 | 1.3 |
| 12x12 | 300x300 | 10-3/4x10-3/4 | 3-3/4 | 1.7 |
| 14x14 | 350x350 | 12-3/4x12-3/4 | 4-3/4 | 2.2 |
| 16x16 | 400x400 | 14-3/4x14-3/4 | 5-1/4 | 2.4 |
| 18x18 | 450x450 | 16-3/4x16-3/4 | 6-3/4 | 3.1 |
| 20x20 | 500x500 | 18-3/4x18-3/4 | 9 | 4.1 |
| 24x24 | 610x610 | 22-3/4x22-3/4 | 12 | 5.5 |
CD-5080
The CD-5080 Duct Access Door is designed to provide convenient, economical access to duct components. The insulated door panel, along with the gasketing between the door and frame assures a tight seal without obstruction in the air system. Duct access doors are available in either hinged (HD-5070) or double cam (CD-5080) construction.
|
Door:
|
24 gage galvanized steel, double panel.
|
|
|
Frame:
|
24 gage galvanized steel with 5/8" notched knock over tabs.
|
|
|
Insulation:
|
Door panel filled with 2" fiberglass insulation (7.7 R factor), compressed into 1".
|
|
|
Gasketing:
|
1/8" thick by 1/2" wide closed cell neoprene gasketing between door and frame.
|
|
|
Latch:
|
Self-tightening, hand operated cam latch.
|
RD-5090
The RD-5090 is designed to provide convenient, economical access to round ducts. The pull and catch lock system, along with the gasketing on the door assures a tight seal without obstruction in the air system. The steel continuous piano hinge provides for easy installation.
|
Material:
|
16 gage galvanized steel.
|
|
|
Hinge:
|
Continuous steel piano hinge.
|
|
|
Gasketing:
|
1/8" thick by 1" wide closed cell neoprene.
|
|
|
Latch:
|
Plated steel pull and catch.
|
|
|
Finish:
|
Mill finish.
|
Grease Duct Access Door
The Grease Duct Access Door is a UL and ULC listed access door for installation into grease ducts. The 16 gage steel construction along with the high temperature resistant gasket and sealant allows this door to be grease tight and airtight. This door meets or exceeds requirements of all mechanical codes.
|
|
Bolt in unit easily installed into exisiting ductwork
|
|
|
|
Duct cutout template included
|
|
|
|
No bolts penetrate to the interior of the duct
|
|
|
|
Two handles for easy removal and installation
|
STANDARD SIZE ACCESS DOORS (special sizes available upon request)
| ORDER SIZE | A | B | C | D | E | F | G | H | I (QTY) |
| 7"x7" | 10" | 10" | 10.5" | 10.5" | .5" | 1" | 7" | 7" | 4 |
| 7"x12" | 10" | 15" | 10.5" | 10.5" | .5" | 1" | 7" | 12" | 6 |
| 7"x20" | 10" | 23" | 10.5" | 23.5" | .5" | 1" | 7" | 20" | 10 |
| 12"x12" | 15" | 15" | 15.5" | 15.5" | .5" | 1" | 12" | 12" | 8 |
| 12"x20" | 15" | 23" | 15.5" | 23.5" | .5" | 1" | 12" | 20" | 12 |
| 16"x20" | 19" | 23" | 19.5" | 23.5" | .5" | 1" | 16" | 20" | 12 |
| 20'x20" | 23" | 23" | 23.5" | 23.5" | .5" | 1" | 20" | 20" | 16 |