SD-6000
The SD-6000 is a heavy-duty access door designed for use in high security areas. The angle frame construction and 10 gage plate door panel makes this access door ideal for prisons, correctional facilities, housing projects etc.
Our standard security butt hinges are surface welded to the door and frame, allowing the door panel to operate freely. A detention type deadbolt lock with paracentric key is standard.
|
Material:
|
Steel or Stainless Steel: 10 gage door, 2"x2"x3/16" angle frame.
|
|
|
Door:
|
10 gage plate, flush to edge of frame.
|
|
|
Frame:
|
Flange to be 2" wide, mounting frame to have anchor straps.
|
|
|
Hinge:
|
Heavy duty butt hinges, welded to door and frame
|
|
|
Latch:
|
Detention type deadbolt lock with paracentric key.
Also available: tamperproof security cam latches, cylinder lock and key. When master keying is required, doors can be prepared for rim cylinder locks. |
|
|
Finish:
|
Steel: 5-stage iron phosphate preparation with prime coat of gray baked enamel.
Stainless Steel: #4 Satin Polish. |
STANDARD SIZE ACCESS DOORS (special sizes available upon request)
| NOMINAL DOOR SIZE W&H | CEILING OR WALL OPENING | NO. OF LATCHES | WEIGHT PER DOOR SD-6000 | |||
|---|---|---|---|---|---|---|
| INCHES | mm | INCHES | mm | lbs. | kg. | |
| 12x12 | 305x305 | 12-3/8x12-3/8 | 314x314 | 22 | 10 | |
| 16x16 | 406x406 | 16-3/8x16-3/8 | 416x416 | 30 | 13.8 | |
| 18x18 | 457x457 | 18-3/8x18-3/8 | 467x467 | 46 | 21 | |
| 24x24 | 610x610 | 24-3/8x24-3/8 | 619x619 | 70 | 31.8 | |
| 24x36 | 610x914 | 24-3/8x36-3/8 | 619x924 | 90 | 41 | |
| 36x36 | 914x914 | 36-3/8x36-3/8 | 924x924 | 120 | 54.5 | |
MS-7000
The MS-7000 is a medium duty access door. The 12 gage plate door and frame construction and tamperproof security cam latches make this access door ideal for use in medium security jails, prisons, psychiatric institutions, etc.
The door panel features rounded safety corners, which provides an architecturally pleasing appearance. The one-piece trim flange and continuous concealed hinge keep the door panel from racking, sagging, or distorting.
|
Material:
|
Steel or Stainless Steel: 12 gage door, 12 gage mounting frame.
|
|
|
Door:
|
Flush to frame with rounded safety corners and reinforced panel.
|
|
|
Frame:
|
One-piece outer flange welded to mounting frame.
|
|
|
Hinge:
|
Continuous, concealed.
|
|
|
Latch:
|
Tamper resistant allen head cam latch with security pin.
Also available: spanner head cam latch, cylinder lock & key. When master keying is required, doors can be prepared for rim cylinder locks. |
|
|
Finish:
|
Steel: 5-stage iron phosphate preparation with prime coat of gray baked enamel.
Stainless Steel: Type 304 - #4 Satin Polish. |
STANDARD SIZE ACCESS DOORS (special sizes available upon request)
| NOMINAL DOOR SIZE W&H | CEILING OR WALL OPENING | NO. OF LATCHES | WEIGHT PER DOOR MS-7000 | |||
|---|---|---|---|---|---|---|
| INCHES | mm | INCHES | mm | lbs. | kg. | |
| 12x12 | 305x305 | 12-3/8x12-3/8 | 314x314 | 14 | 6.4 | |
| 16x16 | 406x406 | 16-3/8x16-3/8 | 416x416 | 20 | 9.1 | |
| 18x18 | 457x457 | 18-3/8x18-3/8 | 467x467 | 26 | 11.8 | |
| 24x24 | 610x610 | 24-3/8x24-3/8 | 619x619 | 34 | 15.4 | |
| 24x36 | 610x914 | 24-3/8x36-3/8 | 619x924 | 55 | 25 | |
| 36x36 | 914x914 | 36-3/8x36-3/8 | 924x924 | 80 | 36.4 | |